everjoyrental

Choose the Right Skid Steer Loader for Your Needs

Thu, 20 Mar 2025 06:43:43 GMT

A skid steer loader is a hardy, versatile, user-friendly, and economical vehicle for landscaping and construction projects. In particular, the compact construction and ability to turn 360 degrees within its radius makes the skid loader a popular choice over alternatives such as front loader tractors.

Skid steer loaders come in different sizes, capacities, and lift mechanisms. As such, contractors must make careful considerations to select the right skid loader for the job. Here is a guide to help you rent a skid steer loader that will meet your project's specific needs.

Capacity

Capacity is the skid loader's ability to lift a load safely and efficiently. To select a skid loader with the right lift capacity, consider the types of loads you will be lifting.

The lifting capacity is a factor of the vehicle's weight, measured in pounds. The more the skid loader weighs, the higher its lifting capacity. The strength of the boom and bucket also contributes to the machine's carrying capacity.

Size

The size of the skid loader affects the vehicle's maneuverability at the job site - consequently its ability to complete a task fast and efficiently.

For proper sizing, consider both the nature of the job and the size of the job site. The horsepower of a skid loader increases with size. Extensive digging and excavation of difficult terrain require a larger size skid loader with a higher horsepower rating.

Secondly, factor in the dimensions of the job site. Renting a large skid loader for a narrow or constricted job site will hinder productivity. For such workspaces, a more compact vehicle would be a better choice. For larger worksites, consider a bigger skid steer to get the job done faster.

Lift

Think about your lifting operations. Skid load steers can lift loads vertically or radially based on the design of the boom. Machines with vertical-lift booms are suitable for lifting loads to high heights, for example, if you are moving a load from a dump truck to a different location at the worksite.

On the other hand, radial-lift booms stretch further outward and are appropriate for ground-level lifting operations. This type of skid load is ideal for tasks such as landscaping and site preparation.

Each lifting mechanism has its advantages and limitations. For example, while vertical lifts have a greater reach, radial lifts are more compact, lighter, and easier to operate. The lifting mechanism matters the most if you have tasks that require you to lift or move loads in a specific way.

Site Terrain

The type of terrain will determine the most appropriate type of wheels for your particular worksite. Generally, skid loader wheels fall under three categories, which include solid, foam-filled, and air-filled tires.

Air-filled wheels are the most popular as they can travel over a longer distance, glide better over surfaces, and have a longer service life. On the other hand, foam-filled tires are less prone to punctures and are suitable for rough terrains. For even more high-risk terrains, such as mining and metal handling sites, consider a skid steer loader with solid rubber wheels.

A lot goes into selecting a skid steer loader that will give you value for money and peace of mind. While you might want to save on costs, be sure to prioritize safety and efficiency when renting heavy machinery.

At Ever-Joy Rent All, we offer well-maintained, safe, and efficient skid steer loaders at affordable rates. Our reliable team can also evaluate your site and needs and advise you on your best options. Get in touch with us for a quote on our heavy equipment rentals today, and we'll be happy to assist you.

Why Renting Construction Equipment is the Green Choice for Your Projects in Dearborn, MI

Wed, 19 Feb 2025 07:23:18 GMT

In an era where sustainability is more important than ever, contractors and construction companies are continuously seeking ways to minimize their environmental impact. One of the most effective ways to reduce your carbon footprint while still getting the job done is by opting for construction equipment rentals in Dearborn, MI, instead of purchasing new machinery. In this blog, we’ll explore how renting construction equipment can benefit the environment and why it’s a smarter choice for your business and the planet.

How Renting Equipment Reduces Environmental Impact

1. Reduces Manufacturing Demand

Every new piece of construction equipment requires raw materials, energy, and labor to manufacture. By renting instead of buying, you’re reducing the demand for new machinery, ultimately leading to fewer resources being consumed. This not only conserves energy but also helps lower greenhouse gas emissions that are associated with manufacturing and transportation.

When you rent equipment, you're essentially extending the lifecycle of machinery that’s already in circulation, ensuring that fewer new products need to be made. This contributes to a significant reduction in the environmental impact of the construction industry as a whole.

2. Optimized Equipment Usage

One of the most significant environmental advantages of construction equipment rentals is the opportunity for optimized usage. Contractors can rent the exact machinery they need for each job, ensuring that it’s used efficiently and not left idle for long periods.

When construction equipment is owned, it often sits idle between jobs, consuming energy and taking up space unnecessarily. By renting, you’re only using the equipment when it’s needed, which leads to a reduction in unnecessary emissions from fuel consumption, idle times, and maintenance. Additionally, renting allows businesses to use the most modern and fuel-efficient equipment available, helping to lower overall energy consumption and emissions.

3. Decreases Idle Times and Maintenance Needs

Construction machinery requires regular maintenance to stay in top shape. When equipment is not used frequently, it may need more maintenance, contributing to waste and unnecessary energy use. By renting, contractors ensure that machinery is used more efficiently, and the maintenance is handled by the rental company, not the individual user.

This reduces the risk of over-maintenance, unnecessary repairs, and wasted resources, ensuring that the equipment remains in good working condition for a longer period. Many rental companies also offer newer, more energy-efficient models that require less maintenance, which further reduces your environmental footprint.

Why Renting Makes Sense for the Environment and Your Bottom Line

Choosing construction equipment rentals isn’t just a smart decision for your business—it’s a step towards protecting the environment. By reducing the demand for new manufacturing, optimizing equipment usage, decreasing idle times, and supporting a circular economy, renting helps conserve valuable resources and reduce emissions.

If you’re ready to contribute to a greener future while ensuring your construction projects run smoothly and efficiently, it’s time to consider renting instead of buying. Discover eco-friendly rental solutions with Ever-Joy Rent-All, call us at  (313) 846-3130  to learn more about our rental services.

Maximizing Efficiency: How Rental Equipment Can Streamline Your Construction Projects

Wed, 11 Dec 2024 07:21:22 GMT

In the bustling construction landscape of Dearborn, MI, optimizing project efficiency is a top priority for contractors and project managers. One highly effective strategy to achieve this is through construction equipment rentals. Leveraging rental equipment can significantly enhance productivity and streamline operations on job sites. In this article, we explore the various advantages of utilizing rental equipment, from accessing cutting-edge technology to meeting deadlines and budgets without the long-term commitments of ownership.

The Advantages of Rental Equipment in Construction

Access to the Latest Technology

One of the primary benefits of construction equipment rentals is the ability to access the latest technology and machinery. Construction technology is evolving rapidly, and staying up-to-date can be a costly endeavour for companies. Renting equipment allows contractors to use advanced machinery without the hefty price tag associated with purchasing it. This not only improves the quality of work but also enhances efficiency by utilizing equipment designed to perform tasks faster and more accurately.

Cost-Effective Solutions

Owning construction equipment involves significant upfront costs, ongoing maintenance, storage, and depreciation. By opting for rental equipment, contractors can sidestep these financial burdens. Rental agreements typically include maintenance and repair services, ensuring that machinery is always in optimal working condition. This enables project managers to allocate resources more effectively and focus on other critical aspects of the project.

Flexibility and Scalability

Construction projects often have varying equipment needs depending on the phase and scale of work. Renting equipment provides the flexibility to scale up or down based on project requirements. Whether you need a specific piece of machinery for a short-term task or a fleet of equipment for a large-scale project, rental services can accommodate your needs. This flexibility not only streamlines operations but also helps in managing project timelines more efficiently.

Meeting Deadlines and Budgets

Utilizing rental equipment can play a crucial role in meeting project deadlines and staying within budget. With access to a diverse range of machinery, contractors can ensure that they have the right tools for every job, reducing downtime and increasing productivity. Rental services also offer the convenience of immediate availability, preventing delays that could arise from equipment shortages or malfunctions.

Why Choose Ever-Joy Rent-All in Dearborn, MI?

Construction equipment rentals provide a myriad of benefits that can significantly streamline your projects. From accessing the latest technology to maintaining flexibility and meeting deadlines, rental equipment is a cost-effective and efficient solution for modern construction needs.

For contractors and project managers in Dearborn, MI, Ever-Joy Rent-All offers a comprehensive range of construction equipment rentals designed to meet the demands of modern construction projects. Their extensive inventory includes everything from earthmoving equipment to power tools, all maintained to the highest standards. By partnering with Ever-Joy Rent-All, you can ensure that your projects are equipped with the best machinery available, boosting overall efficiency and productivity.

Don't let equipment limitations hold back your project’s success–Contact Ever-Joy Rent-All today and discover how their top-quality rental equipment can transform your construction projects in Dearborn, MI. Call  (313) 846-3130  to find the right rental equipment for your needs!

What OSHA Wants You to Know About Heavy Equipment Rentals

Mon, 18 Oct 2021 07:18:13 GMT

The Occupational Safety and Health Administration, commonly referred to as OSHA, wants you to be safe while operating heavy equipment. While most people are familiar with OSHA and strive to create a safe working environment, here are a few helpful reminders to keep your team safe and on good terms with your local OSHA compliance officer.

Know How to Use the Equipment

When you rent heavy equipment, make sure you or a member of your team is knowledgeable on how to operate it. While previous experience is essential, it is also important that you talk to the rental agent for any specifics on the make and model that you will be using. Furthermore, familiarizing yourself with the machine by reading the manual is helpful. Accidents happen when inexperienced people operate heavy machinery above their skill level.

Visually Inspect

It is crucial to visually inspect the machine before using it each day. This includes walking around the piece of rental equipment to look for obstacles and to inspect the surrounding terrain. The machine itself should also be inspected for loose wires or cables, sturdy guardrails, secure safety pins, and fuel levels. Taking just a few minutes to inspect a piece of heavy equipment like an aerial lift or a backhoe before using it can go a long way towards improving team safety and avoiding accidents.

Solid Foundation

A key factor to successfully renting and using a boom lift or a personnel lift is making sure the unit is on solid ground. The ground must be firm, level, and able to support the weight of the lift. If the area is uneven or the ground is soft, you will encounter stability issues that could result in the lift tipping or completely overturning. Sadly, sometimes there are a few situations where serious injury or death occurs when aerial lifts are overturned. Most lifts have leveling components that are discussed in depth in the manual that comes with the machine you are looking at renting. Read through the manual and follow all of its safety guidelines to make sure you are following all protocols.

While not a safety issue, soft ground is also a problem from an aesthetics standpoint. Soft ground is easily torn up by both the machine's weight and by the treads as it moves across the area. This can often result in damaged sod and landscaping plants.

A Harness is Your Best Friend

OSHA requires wearing a harness for anyone using a lift. It is simply the best choice for you and your team and the only way you can ensure them that everyone will go home safely. Harnesses save lives. It is important to remind every member of your team to wear a safety harness when operating any elevated equipment on the job site. It is also important to observe them and ensure that they are following the worksite safety rules.

Power Lines

You should always visually assess the area in which you will be working before starting any project. Make sure that the heavy equipment you are using will not come into contact with electrical power lines or any other electrical components. In fact, one of the leading causes of death while using aerial lifts is electrocution from overhead power lines. Be aware of your surroundings and work with a spotter to assist in areas where you cannot see your surroundings clearly.

Renting heavy equipment gets the job done, but it is important to be safe. When you need to rent heavy equipment in the metro area, Ever-Joy Rent-All can help. Call today and tell us about your project.

3 Things to Pressure Wash Before a Summer BBQ

Thu, 26 Aug 2021 07:16:28 GMT

Summer is a time when people enjoy gathering together to spend time outdoors. Hosting a BBQ is one way to bring your family and friends together. A lot of time and effort goes into getting ready for a large summer BBQ.

Access to the right tools can help you streamline the preparation process and get your home looking its best before your guests arrive. One tool that can prove invaluable in preparing for an outdoor gathering is a pressure washer.

If you want to maximize the efficiency of your preparatory efforts, rent a pressure washer to help you clean the following three things.

1. Your Grill

A functional grill is the centerpiece of any summer BBQ. A dirty grill will not only compromise the quality of the food you prepare for your guests - a dirty grill can be a serious fire hazard.

If you don't clean your grill before you start cooking the next round of burgers or steaks, you could experience a nasty flare-up or a full-blown fire.

A pressure washer gives you the ability to remove hardened grease and fat deposits from your grill without having to spend hours scraping and scrubbing with a brush.

2. Your Outdoor Furniture

Your guests will need a comfortable place to sit and relax while enjoying your summer BBQ. Outdoor patio furniture is often used to provide seating for guests. Unfortunately, your furniture could become more of a nuisance than an asset if you don't take the time to clean each piece before your BBQ begins.

Patio furniture is typically made from materials like vinyl, metal, or wood. These materials are designed to retain their structural integrity when exposed to the elements over time. A lot of dirt and debris can accumulate on the surface of outdoor furniture.

You can use a pressure washer to quickly and efficiently remove all dust and debris from your patio furniture. Pressure washers can be used on both furniture frames and any cushions that you add to these frames for comfort.

Your guests will appreciate having a clean place to sit, and you won't have to spend hours scrubbing dirt away when you opt to use a rented pressure washer to clean your patio furniture.

3. Your Deck or Patio

Many homeowners choose to host a summer BBQ on their patio or deck. These outdoor living spaces are great places for guests to congregate. Take the time to clean your deck or patio if you want your guests to feel comfortable and safe.

A pressure washer can be used to clean wood or vinyl decks, as well as concrete or asphalt patio areas. Eliminating dirt and debris from your deck or patio can create a clean space for your guests.

Dirt and other contaminants can cause your deck or patio surface to become slick when exposed to moisture. This puts your guests at risk of falling. Rent a pressure washer that comes with a variety of nozzles so that you can give your deck or patio a thorough deep cleaning.

A pressure washer can help you improve the aesthetic, safety, and performance of your outdoor living space well into the future.

A pressure wash is a valuable tool to have around the house when you are preparing for a summer BBQ. You can use a pressure washer to clean your grill, outdoor furniture, and deck or patio. Contact Ever-Joy Rent All for help finding the right pressure washer to rent.

Simple Maintenance Tips for Bobcat Machines

Wed, 30 Jun 2021 07:15:02 GMT

Bobcats are used in various ways at home and on construction sites to make work easier. They are multifunctional with attachments such as angle brooms, augers, backhoes, bale forks, box blades, breakers, and brush cat rotary cutters that can be mounted on them.

However, many people are unfamiliar with simple routine maintenance practices they need for added efficiency and lifespan extension. Here are simple maintenance tips that will guarantee your Bobcat machine a longer life and greater efficiency .

1. Greasing Moving Parts

Wear and tear are common for moving parts of a machine. However, the rate at which wear and tear occur can be reduced by regularly greasing the moving parts to achieve smooth motion. Some of the critical moving parts include bearings, hydraulics, gears, and joints. Worn-out parts reduce the effectiveness of machines which can also lead to a breakdown.

Greasing should be done every day before work.

2. Checking Hydraulics Oils

Bobcat uses hydraulic pumps to lift and lower various attached equipment. To function effectively, the hydraulic oil should be maintained at its minimal levels. If the hydraulic oil is insufficient, the attachment may malfunction, which would inconvenience the quality of the work output.

Before you begin working, always check the hydraulic oil level to ensure that it is within the recommended amount, to assure swift functionality of the machine.

3. Cleaning Oil Filters

Most construction machinery uses diesel engines. The fuel passes through a filtration process before entering the combustion chambers. Diesel contains contaminants that have to be filtered before combustion to boost power output. The filtration process leaves dirt sediments in the filter which, if used for long may lead to clogging. This prevents even flow of fuel, adversely affecting the machine's functionality.

If the fuel supply is affected, the machine may fail or perform poorly. The filters need to be changed regularly to keep the machinery working well.

4. Cleaning Air Filters

Diesel engines require airflow in the engine to aid fuel combustion. The air entering the engine must be filtered to ensure that dust particle does not find a way into the combustion chambers. The working environment of a Bobcat is always dusty due to the digging and packing of soil. For that reason, a lot of dirt is sucked into the air filter. If left uncleaned for long, the filters may clog and block the airflow into the engine. Insufficient airflow into the engine reduces its efficiency and increases fuel consumption by at least 10%.

Air filters are cleaned regularly by removing the trapped dirt. This should not be a daily maintenance routine since the dirt takes time to build up. Using high-pressure air is ideal in blowing the dirt from the filter.

5. Checking Coolant Fluid

Many hours of work cause the engine to heat up and reduces its efficiency. Coolant fluid helps to maintain the engine temperatures and keeps it cool. The primary cause of excessive heating in the engine is the friction caused by the pistons and the engine block. With the right coolant, Bobcats can work for a prolonged time without breaking down due to heated engines.

Operating an excessively hot engine may lead to its breakdown, which may require an entire engine replacement. It is advisable to always maintain the coolant fluid within its appropriate levels to avoid huge expenses in engine repair.

A simple machine maintenance routine saves money that would be used in parts replacement and repair. You do not need to be a professional mechanic to administer the above maintenance tips. Just like humans, machines need some care to operate efficiently.

Additionally, you do not need to buy a $30,000 machine for a few hours of work when you can hire one affordably. If you need to hire highly efficient heavy and light contraction equipment, contact Ever-Joy Rent All .

Why You Should Consider Renting Over Owning a Backhoe

Wed, 09 Jun 2021 07:13:08 GMT

If you're into construction or farming, you have probably come across tasks that require heavy machinery such as a backhoe. The obvious choice is to buy one, but it's not always the best alternative. Below are considerations for why renting is the better option.

Scope of Work

Why do you need a backhoe? Is it for the specialized odd jobs that you get every four months? If you expect to use the backhoe daily, it makes sense to buy one. Once you own a backhoe, it's available when you need it.

However, before you make that purchase, calculate the cost of owning versus renting a backhoe during the period of use. Take into account the number of hours you'll use the machine every day and week. If it will cost more to own, opt to rent unless you expect similar projects in the future.

If you're a small company in the construction industry, renting is the most viable alternative. Since your budget will be tighter, it's not financially feasible to buy a backhoe at this stage. You can rent and as your business grows, consider options such as financing.

Maintenance Costs and Depreciation

Heavy equipment such as backhoes depreciate rapidly. It's estimated that they lose 20 to 40 percent of their value in the first year. Such machines work in rough conditions, which is why they depreciate faster.

If you're worried about the depreciation rate, consider buying a used backhoe or renting one. After the first year, the depreciation rate is linear. With this in mind, a used machine would ease your worries.

Alternatively, you can rent the equipment to eliminate depreciation worries and maintenance costs. When you buy a used or new backhoe, you'll always deal with maintenance. The older the machine is, the more expensive the maintenance will cost. With rented equipment, the rental company handles the repair and maintenance.

Insurance Costs

The cost of insuring a backhoe is high, especially when you add that to the purchase and transportation cost. These machines will set you back a couple hundred thousand dollars even before you can use them.

You can avoid these costs when you rent from rental companies. Unlike you, rental companies own large fleets and can negotiate lower premiums on their machines. You'll still pay the insurance as part of the rental cost, but it's significantly lower than what you'd pay if you owned the backhoe.

Access to New Machinery

You can't expect to buy a new backhoe every year, especially if your current machine is running perfectly. However, rental companies need to update their fleet to meet demand and they'll have newer models of popular machinery such as backhoes.

If you want to test the latest backhoe, your preferred rental company probably owns it. You can rent it for a few jobs and weigh if it's better than the older models. By the time you decide to purchase your own, you'll have tested different brands and made an informed decision .

Market Testing

If you're starting out, it's better to test the market before you invest heavily in machinery. Instead of paying $150,000 for a backhoe, why don't you rent it to test the demand for such specialized equipment?

This will free up capital that you can channel to other projects. Since you can rent, use the opportunity to test which brand loses value faster, wears and tears easily, and can handle your current workload without hiccups.

Where to Rent Backhoes

If you're not using a machine for over 70 percent of the time, consider other options such as renting Ever-Joy Rent-All. We're a renowned rental company that has served Detroit and its environs for over 70 years. Contact us today for more details on backhoe rentals.

Easy-to-Implement Safety Tips for Using an Aerial Lift

Wed, 19 May 2021 07:11:07 GMT

Aerial lifts are essential equipment for people who work at different heights. Whether you want to repair an HVAC unit, wash high-rise windows, trim a tree, service utility lines, or perform safety inspections, an aerial lift helps to get the work done effectively and promptly.

Although aerial lifts are useful and efficient machines, they can cause safety risks like injuries and falls when used inappropriately. Learn eight aerial lift safety tips to stay out of harm's way.

1. Ensure Operators Are Trained

All aerial lift operators should be trained to use different types of lifts based on the manufacturer's instructions and have updated certifications. Employers should oversee the training to maintain workers' safety.

2. Inspect the Equipment Before Use

Before operating an aerial lift, check that all parts are functional. Start with the vehicle and examine the wheels, tires, lights, horns, backup alarms, and fluid levels. Then, inspect the lift for missing or loose parts. Most importantly, test whether the lift works correctly before loading workers or supplies.

3. Gear Up

Workers should have the appropriate gear when using aerial lifts, including full-body harnesses or restraining belts. A full-body harness can be the difference between a minor incident and a major injury if an object unexpectedly hits the lift.

4. Survey the Work Area for Hazards

Whether you work indoors or outdoors, ensure the work zone is safe. First, check for floor obstructions like slopes, holes, ditches, and unstable surfaces. Second, avoid operating aerial lifts in strong winds to prevent tip-overs. Third, check above for overhead electrical lines and communication cables.

Power lines, for instance, transport vast amounts of power. If your aerial lift comes into contact with it, the results may be catastrophic. Keep at a safe distance - at least 10 feet from a power line. Also, work with your supervisor to de-energize power lines before working.

5. Do Not Exceed Height and Weight Limits

Adhere to manufacturer's instructions on height and weight limits to prevent tip-overs and ensure workers' safety. Consider the weight of the operator, workers, tools, and materials on the lift. Never load weighty objects and supplies.

6. Never Sit or Lean on the Platform's Edge

Aerial lifts have guardrails to safeguard workers from falling and should not serve as seats. Sitting or leaning on the rails increases the risk of falling or the lift tipping over. In case you want to reach a distant object, do not climb on the rail; instead, move the lift a few inches higher.

7. Lower Before Moving

Before moving an aerial lift, ensure you lower it unless the manufacturer's manual states otherwise. Moving it in the raised position can cause the equipment to tip over and injure any workers on board.

8. Clear Traffic in the Area Surrounding the Aerial Lift

One of the most common safety hazards of an aerial lift is an object falling from the platform and hitting a pedestrian. To prevent this, keep pedestrians and workers from the base of the lift. Put up work zone warning signs to clear any traffic.

Thanks to advances in technology, workers do not have to use leaders to access high job sites and hard-to-reach spots. They can employ aerial lifts to work at elevations safely, conveniently, and efficiently. Complying with the safety tips above can help avoid safety hazards such as unsecured workers falling, machine tip-overs, electrocutions, and falling objects hitting people below.

If you need to use an aerial lift but don't have one at hand, rent one from Ever-Joy Rent-All at a competitive price. Our aerial lifts come with the latest technology and safety features to promote workplace safety. Contact us today .

Use Equipment Rentals to Prepare Ground for an Outdoor Event

Fri, 26 Feb 2021 07:08:45 GMT

More and more entertainment and sports events must take place outside to help maintain plenty of space between spectators and participants. As outdoor events increase in popularity, so does the need for new venues.

Often a new venue springs from raw ground like a fallow field or an unused meadow. But before advertisers and sponsors can make their statement, the site must first be able to accommodate vehicles, temporary structures, and people. Mud, vegetation, or boggy grounds aren't acceptable.

Here's how to use equipment rentals during each step of ground preparation for an outdoor field event.

Tackle Large Trees and Vegetation

Sometimes a portion of land contains large trees or thick vegetation - enough to hamper vehicles and people during the early stages of site preparation. A loader is robust enough to fell large trees and strip land of swaths of heavy vegetation.

This remedy rids land of these obstacles and collects them in a central spot for ease of processing and removal. More importantly, the general topography of the land is more visible. This helps event coordinators better plan whether further equipment is necessary for additional tasks.

Demolish Structures and Hoist Large Debris

Use an excavator to tear down abandoned, crumbling, or unnecessary structures on a piece of ground. An excavator's unique design allows you lift chunks up and away after you tear into a wall. The bucket attachment can more delicately maneuver sections of masonry or cement than a loader.

This same method can be applied to other large pieces of debris, like tree trunks or trash. Hoist sections of trunks and large limbs directly into a dump truck for removal or straight into a wood chipper.

Remove Rocks and Brush Piles

Before you can tackle the task of leveling rough ground for an event, first remove rocks and other accumulated debris. Remember that left over pile of vegetation after you cleared the brush? You might be surprised how many rocks, dead trees, tires, and trash remains after you clear away the underbrush.

Depending on your needs, an excavator or loader can scoop up the rest of the rubble. For example, a loader will corral and then gather up a large amount of debris in one swoop. An excavator can handle a small number of widely scattered stones or individual pieces of rubble. You can use a dozer to hoist and transport lightweight brush and saplings.

Level and Fill in Ground

Outdoor events must take place on relatively level terrain. Large inclines create uneven ground for important structures like temporary stages, fencing, sound equipment, and portable restrooms. Low or boggy ground generates a mud problem after a heavy rain that can foul utility lines, trap vehicles, and ruin spectator fun.

Loaders are ideal to shave high spots and fill in hollows. The scoop pushes excess dirt directly into low areas and reduces the need to haul in supplementary fill dirt. Remember, the temporary and infrequent nature of an outdoor event means permanent measures like runoff and erosion control are not a priority.

Distribute Ground Cover

Certain outdoor events require some type of ground cover. For example, a festival with animals needs groundcover to make the animals more comfortable. A sporting event might need a way to protect equipment and prevent player injury. Most events need a way to prevent visitors' cars from getting stuck in muddy parking lots.

You can use a loader to place and spread a variety of ground covers. Hay, bark, and gravel are easy to move around and distribute when you have a large scoop.

Come and visit our selection of heavy equipment at Ever-Joy Rent All. We also carry other essential items like fork lifts, compressors, and back hoes.

5 Safety Tips for Your Rented Forklift

Fri, 29 Jan 2021 07:06:31 GMT

Did you know that at least 1 in every 10 forklifts is involved in an accident every year in the United States? These accidents occur due to different reasons, including untrained operators, poor maintenance, overloading, and unsafe load arrangement.

Therefore, you need to know the standard safety guidelines you should follow. This is particularly critical if you have rented the forklift. The following are safety tips to keep in mind when using a rented forklift.

1. Train Your Operators

You should not allow untrained operators to manage forklifts on your site because they are likely to cause accidents. If you don't have trained personnel in your team, hire some from the rental company. You might also need to take some of your employees through a training program in accordance with OSHA standards to get the relevant certification.

The employees should be trained on how to handle, inspect, and operate different types of forklifts. Despite going through the training and being certified, the operators should also enhance their knowledge and skills using lectures, practical sessions, and tutorial videos. Ensure you train them if you rent an advanced forklift.

2. Inspect the Equipment

Forklift inspection before use can prevent many accidents. Every day, you should inspect the brakes, steering controls, fluid levels, leaks, tire condition, guards, seat belts, and horns. This will help you spot issues early before you start operations.

Moreover, you should inspect the equipment before hiring. If you want to use the forklift for a long time, you should hire an expert to inspect the forklift regularly. Most rental companies offer maintenance checks, making work more manageable for you.

3. Make the Work Site Clear

You need to ensure no worker is near or under the machine during operations. Lay down strict rules to restrict movement around the forklift.

In some instances, a worker or pedestrian may be on their phone and may not be quick to spot the forklift. Fortunately, you can reduce the risk of accidents with warning lights.

These bright lights can warn anyone of an approaching forklift. If you rented a forklift model that doesn't have these lights, ask the company if they can install them for you.

You should also have floor markings to show operators and other workers the areas to avoid to prevent accidents. For instance, you should mark pedestrian routes, hazardous areas, emergency paths, and electrical area boundaries.

4. Install an Anti-Static Ground Strap

Static electricity is usually produced when forklifts land. The energy generates when the machine's tires come into contact with the ground. During high-speed operations, the produced static electricity can be so strong that it can injure an operator.

Therefore, you should consider installing an anti-static ground strap to transfer the electricity to the ground and not back into the machine. If the rented forklift has non-marking tires infused with anti-static features, you don't need the ground strap.

5. Wear Protective Clothing

You and your employees should wear protective clothing at all times while using the forklift. You should have gloves, boots, and eyewear to minimize the risk of injury. Also, you should wear highly reflective clothing to increase visibility and reduce the chances of collisions.

6. Ensure the Load Is Safe and Secure

Every forklift has its maximum lifting capacity, and you should not exceed the limit. If you have a large load to lift, rent a forklift with a high capacity.

You should be careful about how you arrange the load and use bindings or ropes when necessary. Don't exceed the recommended speed limit. Always slow down when changing directions.

Forklift safety measures can help you avoid accidents on the worksite. Our company offers different types of equipment that can be used in a construction site, warehouse, and at home. If you need forklifts or other heavy equipment, contact us today for more information.

Choosing the Right Air Compressor for Sandblasting Projects

Wed, 23 Dec 2020 07:04:13 GMT

Sandblasters and blasting cabinets are versatile pieces of equipment, but the most sophisticated, powerful sandblaster on the market is useless if it doesn't have a suitable air compressor. Air compressors provide the force that propels sand or other abrasive media through the blaster.

If you have an upcoming sandblasting project and you need a new air compressor to use with your sandblasting equipment, choosing the right type of air compressor for your needs is very important. If you're having trouble picking out a suitable compressor, keep the following guidelines in mind while you compare models and brands.

Pay Attention to CFM

The size of the blasting nozzle that fits to your sandblasting equipment will play a large part in determining your choice of air compressor. The wider the diameter of the nozzle, the higher the rate of airflow necessary for the blasting equipment to function properly. If airflow is too low, abrasive materials can lodge in the nozzle, undermining efficiency and potentially damaging your equipment.

The rate of airflow that an air compressor can produce is measured in cubic feet per minute, or CFM. Air compressors with high CFM values can go with larger nozzles. The manufacturer's information with the nozzle you intend to use should tell you how high your air compressor's CFM needs to be. Alternatively, you can ask your air compressor supplier for their recommendation.

For sandblasting operations, choose an air compressor with a higher CFM value than your nozzle requires. This is because the nozzle itself will suffer wear when exposed to blasting media, which will make the nozzle wider over time.

Check Your Equipment's PSI Rating

You should also pay attention to the amount of air pressure (measured in pounds per square inch, or PSI) that your new air compressor can provide. An air compressor with a high PSI rating can force blasting media through the nozzle at higher speeds, increasing the abrasive force of the media and speeding up your sandblasting project.

The amount of PSI your project will need is determined largely by the type of blasting equipment you intend to use. For example, siphon sandblasters draw their abrasive media from a separate tank and usually a high amount of PSI to function efficiently. Direct pressure blasters have media storage tanks built directly into their air lines and can function with a smaller PSI.

Check the manufacturer's information that comes with your sandblasting equipment to determine how much air pressure that your new air compressor needs to supply. Higher PSI ratings can speed up your sandblasting work, but choosing an overly powerful compressor may damage the equipment and cause excess wear, so don't go overboard.

Look For Long Duty Cycles

Efficient sandblasting requires an air compressor that can supply compressed air continuously for long periods. Unfortunately, air compressors generate a lot of waste heat while functioning and must deactivate periodically to prevent overheating problems.

The length of time an air compressor can be used before it needs deactivating is known as its duty cycle. Some piston-driven air compressors have 100% duty cycles, meaning they can be used 24 hours a day with no interruptions. However, these compressors can be very expensive and are generally more suitable for large, industrial sandblasting projects.

If your budget is smaller, a compressor with a 75% or 50% duty cycle will be more affordable and can still be used for relatively long periods. A compressor with a 75% duty cycle can function for seven and a half minutes out of every ten without overheating and can be used to perform large sandblasting tasks (such as removing rust from construction equipment) in a short time frame.

Following these basic guidelines should help you make the right decision when choosing an air compressor for your sandblasting equipment. If you need any more advice or product recommendations, get in touch with the air compressor experts at Ever-Joy Rent All .

5 Steps of Pond Construction That May Require Machinery

Tue, 01 Dec 2020 07:01:25 GMT

When you're building a pond on your property, the process is a little more complicated than just digging a hole in the ground. Luckily, if you have the correct machinery, then carting away the extra dirt, hauling rocks for an edging, and other aspects of the process may be much less arduous.

Here are some of the major steps in the pond construction process that you may need to rent machinery for.

1. Clearing and Preparing the Area

If you have any trees in the spot where you plan to build the pond, you'll likely need a variety of machinery, from chainsaws to stump grinders, to remove these trees. You may want to hire a professional to help remove any full-sized trees before you get on with the clearing process. But you can likely take care of small sapling-sized trees yourself with the right machinery.

For brush clearing, plan to use a large mulcher and a bulldozer. Grinding up any vegetation in the area is an essential way to allow access to the site so excavation can begin.

2. Excavating the Pond

Digging out all the topsoil from the area where your pond will be is a very big job. You'll typically need excavation equipment such as a backhoe or a front-loading excavator for this job, especially if you plan to create a large pond.

Whether you choose to operate this heavy equipment yourself or hire an operator should depend on variables such as:

Your level of experience and qualifications for this machinery
How much work you need this machinery to do
Whether any job complications exist or are likely to occur

Even if you do have basic qualifications for a backhoe, you'll find hiring an expert is the safest option if any complications are likely to crop up or if the job requires long hours of backhoe use.

3. Laying Irrigation Lines

If you plan to use your pond for irrigation, or if you need to bring electricity to your pond (to run a fountain, for instance), you'll likely need to bury power lines or irrigation lines. A machine such as a trencher can make this job much quicker and easier.

A walk-behind trencher machine may fit the bill here. It's more maneuverable than a ride-on trencher, and unless you're doing an industrial-sized amount of trenching, it should get the job done easily.

4. Edging With Rocks or Berm

Once you've dug the pond and added a liner (if applicable), you'll need to finish the bank of the pond. One option is to use excess topsoil (excavated from the pond) to create a berm around the pond's edge. You'll want this berm high enough to keep stormwater runoff from draining directly into the pond, yet it shouldn't be too steep for you to easily tend the grass on the berm.

If you decide to create a berm, you'll need to use your excavating and loading equipment to move the soil into position. If you decide not to use a berm, and simply line the edge of the pond with rocks, you'll likely want machinery such as a skid steer loader to help you bring the rocks to the right spots.

5. Laying Sod or Seeding

After the pond is fully in place, you'll need to repair the lawn to finish the project. You'll need to reseed any areas of lawn that the machinery tore up (perhaps using a mechanical reseeder), and you'll need to seed or lay sod over any berms you created around the pond. To install sod, you may need equipment such as a lawn roller attachment for a skid steer loader.

These are just some of the processes involved in pond construction that you may need to perform with machinery. For more information about the equipment we can provide and our terms and pricing, get in touch with Ever-Joy Rent All today .

Fall Projects That May Require Aerial Lift Equipment

Tue, 03 Nov 2020 06:58:42 GMT

Fall is a season of many changes, and it's also the harbinger of winter. As a homeowner, you may feel an increased urgency to accomplish some home and landscaping maintenance tasks before winter hits. Many of these home and landscape maintenance tasks may involve reaching high places.

Whether you have a fear of heights or not, you can access high spots more safely from an aerial lift with a safety harness than from a simple ladder. Here are some fall projects that may require or benefit from rental lift equipment.

Hanging Holiday Lighting and Decor

Whether you go all out for every holiday starting with Halloween or whether you just want to put up a few modest lights before December arrives, rental equipment can help you hang holiday decor easily and safely. For example, if you're hanging lights on trees or placing inflatable decorations on your rooftop, an aerial lift can help you get there and back to the ground safely.

Tree Pruning

While some types of trees may need less frequent pruning, other trees (such as fruit trees) likely require a pruning session every year to stay as healthy as possible. And since late fall is a dormant time for deciduous varieties, it's typically a great time to prune.

Climbing a tree while holding pruning equipment, though, could be unsafe as well as difficult. An aerial lift can help you reach the very tops of your trees to ensure even, full-coverage pruning without any hazardous climbing.

Gutter Care and Cleaning

You may be planning to install or replace your gutter guards this year. Or, you may simply need to give your gutters a good cleaning out so they won't become clogged up with this fall's dead leaves.

Either way, getting to the gutters safely can be tricky, but rental aerial lifts can help circumvent this problem. Even gutters on the second story can be reachable if you have a good aerial lift truck. Don't forget to check the gutters for signs of damage while you're at it. Tightening fasteners or replacing gutter anchors are other gutter care tasks you may need to perform from a lift.

Window Cleaning and Protection

Like your gutters, the windows on your home's second story may be difficult to access for fall maintenance. But with an aerial lift, you can easily get to any windows to clean them from the outside, with no long unwieldy poles needed. You can also install storm windows or shutters or take down summertime awnings while you're up there.

Fruit Picking

Another tree-related fall task (if you're lucky enough to have a fruit tree) is fruit picking. Many fruits, such as apples and pears, ripen in the fall.

While you can pick up the fruit after it falls to the ground, picking it off the tree can avoid any bruising and trauma it could experience on the way down. This results in higher-quality fruit, which is great whether you're planning to sell the fruit or eat it yourself.

Chimney Care

While you should have your chimney professionally inspected for safety before you start using it in the fall, you may be able to perform some home maintenance tasks as well. For instance, you can check the chimney cap for damage after a storm, sweep any debris from behind the chimney, and check the flashing around the chimney's base for cracking or other damage.

These tasks require you to get high enough up to inspect your chimney closely, however. Climbing on the roof is typically considered unsafe, so choosing an aerial lift can be your best option.

Your home and landscape maintenance tasks this fall don't have to be laborious or involve a lot of climbing. Renting an aerial lift from Ever-Joy Rent All is an easy and effective way to help you reach those out-of-the-way spots like the upstairs gutters or the top of your apple tree. Get in touch today to learn more about the extensive selection of rental equipment we carry.

Excavators for Do-It-Yourself Homesteading Projects

Wed, 30 Sep 2020 06:56:00 GMT

As a homesteader, you're probably no stranger to DIY projects. If you're planning a serious DIY project that involves a lot of digging, though, you may need some machinery such as an excavator to help you out with the project.

Here are just a few homesteading DIY projects where an excavator will come in handy.

Digging a Pond

Homesteading tends to have self-sufficiency as one of its goals. A pond on your property can aid in self-sufficiency in a variety of ways, from providing fish dinners to producing geothermal HVAC power and even irrigation water for your garden.

However, not every homestead comes with a ready-made pond, so you may have to dig your own. Or, you may wish to dig multiple ponds so you can have one dedicated to fish and one dedicated to irrigation, for example.

Since even a small pond may require moving many cubic yards of soil, you'll need a machine such as an excavator to help you get through the project in a timely fashion. An excavator rental can provide a cost-effective and time-effective way to dig out your new pond.

Digging Foundations for Outbuildings

Whether you'll install a prefabricated metal building or DIY the entire building from scratch, any outbuilding needs to have a good foundation. If you want a permanent foundation, you'll need to dig out an area and pour a concrete slab.

But an excavator doesn't just remove dirt from a hole. This piece of machinery can also help you grade and smooth out the bottom of the hole before pouring the concrete. And an excavator can also help with lifting materials, such as concrete blocks, into place in preparation for building the structure itself.

Planting a Rain Garden

A rain garden collects water, similar to a pond. However, unlike a pond, a rain garden has the primary purpose of dealing with stormwater. This structure filters storm run-off through appropriate varieties of plants in order to reduce pollution to bodies of water such as ponds and streams. The rain garden will be full of water after a storm, but may not hold water all the time like a pond.

You'll typically have to excavate the area somewhat to create the most effective rain garden, especially if you have a lot of stormwater to deal with. Depending on the size of the rain garden, an excavator may offer the most effective and efficient way to dig and shape the rain garden area.

Digging a Root Cellar

Root cellars have a long history of keeping home-grown produce fresh throughout the winter. To create a root cellar, you'll have to dig down several feet, creating a hole the size of a small room. You then build a small room inside this hole and cover it with soil so it can use the earth's temperature to stay above freezing during the wintertime.

As you can imagine, holes the size of a small room aren't much fun to dig by hand. An excavator can save you a lot of hours and a lot of blisters here.

Planting an Orchard

Some trees can be planted by hand, with a simple shovel. But as a homesteader, you may need to plant a lot of fruit trees all at once to produce a large enough orchard. Digging dozens of holes by hand can be grueling work, so you may need machinery to help you pick up the pace (and avoid hurting your back).

You may also need to plant larger trees to achieve high levels of fruit production quickly. Larger trees will require larger holes, which can be another reason to choose an excavator for this chore.

These are just a few of the projects a homesteader may face that could require the use of an excavator. So if you don't have any digging machinery of your own, get in touch with a local rental company such as Ever-Joy Rent All to discuss the available equipment and pricing for the excavation you need.

5 Things Every Window Cleaner Needs to Consider Before Renting an Aerial Lift

Fri, 28 Aug 2020 06:53:54 GMT

There are plenty of windows to clean in the metro area, but when you need to clean mid-rise buildings, it makes more sense to rent an aerial lift than to drop down on a bosun's chair suspended from a roof rig. There are, however, a few things every window cleaner needs to know about before they rent a lift. Read on to see five things to consider before you begin your window-cleaning job.

1. Reach

A window cleaner should be able to accurately gauge the height of the building they are cleaning in order to rent an aerial lift. Make sure the lift that you rent extends past the height of the highest windows so you do not need to overextend your reach. You should not take a window-cleaning pole on a lift to help extend your reach; it is not safe.

2. Interior Work

Many buildings in the Detroit area are known for large, glass entrances and atriums. These windows are much easier to clean with a lift. Renting a lift for interior work, however, requires additional precautions. You need a scissor lift or other specialized lift designed for interior cleaning that can both fit through a standard doorway and will not crack floor tiles when properly placed in the work area.

Additionally, you will need to thoroughly block the surrounding area off from foot traffic to protect both yourself, your crew, and the people in the building from injury.

3. Terrain

When you take your window cleaning job, walk around the building carefully to examine the terrain. Picture how you are going to access the area with the lift as well as how you plan to place it. Also, plan how many sheets of plywood you will need to place on the ground to reach the windows.

Plywood helps protect the client's lawn and landscaping from damage due to the lift's weight and it also prevents the lift from sinking into soft ground. If the terrain is excessively difficult, consider a rough terrain or specialized lift rental.

4. Safety

While you may be a talented individual, make sure you thoroughly understand how to operate the lift that you rent. You should perform a safety inspection before you use the lift each day. You should look for signs of visible damage to the lift itself, inspect the guardrail and safety chain, look for overhead wires or other hazards, and check the surrounding ground for anything that could cause the lift to tip or get stuck.

Additionally, there are safety points that you need to be aware of with your own gear. You need a suitable safety harness as required by OSHA for every person that uses the lift. It is also highly recommended that you use tool bungees for your wetter, squeegee, scraper, and bucket. Having loose tools fall to the ground could cause damage to the building as well as injury to any bystanders.

5. Insurance

While you probably already have a decent liability insurance policy, you will want to call your insurance agent to check on your coverage before you rent an aerial lift. Many window cleaners have the option of two policies: a janitorial policy that covers up to three stories of work performed from the ground, or a high-rise policy that covers work done from bosun's chairs and permanently installed carriages.

You may need to make an adjustment to your policy or add a rider to cover window cleaning work done at mid-rise heights while on aerial lifts. You will also want adequate coverage should the rental get damaged.

Mid-rise window cleaning with aerial lifts is a lucrative business in the tri-county area. Whether you need a personnel lift or a telescopic boom lift, contact Ever-Joy Rent All for all your rental needs.

Rental Equipment to Consider When Starting a Vegetable Garden

Wed, 29 Jul 2020 06:52:07 GMT

When you start your own vegetable garden, you'll find a lot of heavy lifting, digging, and other manual labor is involved. You can simplify and accomplish a lot of these tasks more quickly and precisely if you have the correct equipment rentals.

Here are some of the equipment rentals you should consider when you put in a vegetable garden.

Tiller

If you plan to plant your garden directly in the ground rather than in a raised bed, a tiller is a must. A small rental tiller can turn over and break up your soil for you and save you hours of digging.

You can also use the tiller to help you mix in soil amendments after the initial tilling stage. For instance, after the first pass with the tiller, you could spread several bags of compost over the bed and then use a second tilling pass to till the compost in so that it's mixed with the soil (you could also use a cultivator for this task, but a cultivator doesn't break ground well).

Skid Steer Loader

A skid steer loader can be an essential back-saving tool, especially if you're making a large raised garden bed (or multiple raised beds). Even one garden bed can require many edging stones and many bags of garden soil and soil amendments. A skid steer loader can help you get them from your truck to the garden area in your yard.

A skid steer loader can also come in handy for other tasks if you use the right attachments. For example, you can use it for breaking ground. Instead of renting a skid steer loader and a separate tiller, you could choose a skid steer loader with a tilling attachment. And if your garden plot isn't quite as flat as it should be, look for a grading attachment for the loader .

Turf Cutter

A turf cutter machine is a must if you plan to grow a garden in a spot where you currently have grass. This machine gives you the ability to pick up the grass in even strips, roots and all, from the spot where you want to grow vegetables.

The turf cutter cuts the sod into strips for easy removal. You can then move them to another section of the yard and use them to patch up or replace parts of the lawn that are struggling.

Posthole Digger

A posthole digging machine does just what it says: it quickly and easily digs fence post holes. This tool can be essential for any raised-bed or in-ground garden that you plan to fence. Some posthole digging equipment is designed for manual use (you hold the digger while it drills into the ground), while other models hitch onto the back of a machine such as a tractor.

Fencing a vegetable garden is especially important because vegetables offer a food source not just you but to a lot of animals and birds as well. Whether you have raccoons or other wildlife in the area, or whether your neighborhood has a lot of nosy kids, a fence can help you ensure that your plants aren't trampled, plundered, or eaten before you can harvest.

These basic equipment rentals can help you get from the planning stage to the planting stage of your new garden. Of course, different gardens can have different equipment needs. You may also want to rent spraying tools, a chainsaw, or specialized equipment such as a trenching machine (used to install piping for sprinklers or drip irrigation systems).

Ever-Joy Rent All offers skid steer loaders and excavators as well as a variety of lawn and garden tools for you to rent. Get in touch today to learn more about what equipment we have available to help you with your garden bed installation project.

4 Reasons You May Want to Rent a Mini Excavator

Thu, 09 Jul 2020 06:50:31 GMT

When you are working on a large project, the right tools can make all the difference. When you need to move a lot of soil, you can do it with a shovel, but there are better tools for that type of job. A mini excavator would be perfect for any job that requires dirt or any other material moved in large quantities. Read below to see what jobs could benefit from a mini excavator.

1. Space Restrictions

One of the most common reasons to rent a mini excavator is limitations in the size of the work area. If you are working close to a building or in an area that you can't get a full-size machine into, a mini excavator might be the best solution. The machine has a much smaller footprint than a full-size machine and is lighter so it will not be as likely to compact the soil in the area you work in.

Sometimes the restriction is less about the working area and more about access to it. If you need to get the machine down a road or through a gate that is narrow, a mini excavator may fit when a larger machine will not.

2. Small Jobs

Sometimes you need to do a job that you could do by hand but the job is going to take a lot of time and labor to complete. You may need to dig a ditch for drainage pipes, water lines, or electrical wiring, and you probably won't need a large piece of machinery to do the job. However, if the ditch is long and deep, it will probably take you a long time to do by hand, even with help.

You can rent a mini excavator for the weekend so that you can get the work done quickly and without having to recruit too many people to help. If you don't have a large group of dedicated friends to dig the ditch, you might be working alone and the excavator is going to make that situation much easier.

3. Large Jobs

You can make your property look amazing with some landscape projects or land clearing. You can also improve the usability of the property and increase the resale value of the property. If you are dealing with a large area, taking the time to do the work by hand could really extend the timeline on the project.

Your landscape can be improved by the addition of large rocks, a level terrace, or even a new pond or pool. These projects would provide great opportunities for a small, lightweight, and easy-to-operate machine. Many equipment rental companies offer mini excavators because they are extremely versatile and make landscaping or material-moving so much easier.

4. Short Deadlines

Deadlines are sometimes the most difficult thing to deal with. They may be deadlines you set or that are tied to something else that is happening, but if you need to get a specific job done, and there isn't time to do the work by hand, renting equipment is often that best solution.

In some cases, one job must wait until another is complete, so delays in the first job can set the entire project timeline off. The cost of renting an excavator to complete the work quickly may be higher than doing the job by hand, but if that expense is saving you time and potentially money, you may find it is worth spending the money and getting the work done as quickly as possible.

At Ever-Joy Rent All, we have the tools and equipment you need to get the job done. We can work with you to get the equipment you need to your location on time and are happy to reserve equipment for you so that it is ready when you are. Give us a call and we can discuss your equipment rental needs .

Hiring the Best Aerial Lift for Tree Pruning Projects

Thu, 11 Jun 2020 06:48:43 GMT

The ability to reach elevated work areas safely is essential for any tree pruning or tree surgery project, especially if you work particularly tall trees or street trees in built-up urban areas. However, the traditional tree climbing equipment many professional arborists still use requires significant training to use safely and can leave you fatigued by the time you reach the branches you intend to prune.

Hiring an aerial lift from a reputable equipment hire company can make tree pruning projects much easier and faster. Whether you want to hire an aerial lift to prune some trees in your yard or need several lifts to perform commercial tree pruning work, you are sure to find an aerial lift that fits your needs.

However, to get the most from your hired aerial lift, choosing the right lift for the needs of your project is essential. Discover some of the most useful aerial lifts for tree pruning projects, along with their respective advantages and drawbacks.

Scissor Lifts

If you need an aerial lift that combines exceptional stability with a spacious elevated working area, a scissor lift may be ideal for your needs. These distinctive lifts are powered by diesel or electric engines and use a series of motorized, folding supports to raise and lower their working platforms.

Larger models can provide up lots of vertical lift and have working platforms large enough to accommodate several workers and their tools.

Most scissor lifts can be useful on smooth surfaces and for pruning street trees and other trees in urbanized areas.

If you need to work on unpaved terrain, choose a rough terrain scissor lift. These lifts have powerful engines, shock absorbers, and chunky off-road tires and are more useful for professional forestry or agricultural pruning projects.

However, scissor lifts are only capable of providing vertical lift, and their working platforms cannot move horizontally to avoid obstacles or navigate thick foliage. Consequently, scissor lifts are generally more useful for pruning straighter-growing trees that lack wide crowns of branches, such as poplars and aspens.

Boom Lifts

Boom lifts are sometimes known as cherry pickers and are probably the most common aerial lift. They are especially popular in the professional tree pruning and arborist industries. Two main types of boom lift are available.

Telescoping Boom Lifts

These lifts feature a working platform attached to a straight boom that can extend to great heights, allowing you to reach the highest tree branches safely. While their straight booms can only provide vertical lift, many telescoping boom lifts have rotating bases, giving them superior horizontal range of motion compared to a scissor lift.

Articulated Boom Lifts

An articulated boom lift has a jointed boom that can move the working platform horizontally much more easily than a telescoping lift. Probably the most useful type of aerial lift for tree pruning projects, articulated boom lifts are ideal for navigating around large branches or reaching the top or underside of a large, bulbous crown of foliage.

Like scissor lifts, boom lifts are available in both electric and diesel-powered models. Many boom lifts designed for use on rough terrain are also available, including specialized lifts fitted with tracks that can be particularly useful on waterlogged ground.

Personnel Lifts

Personnel lifts resemble smaller versions of a standard telescoping boom lift. However, they are not motorized, and smaller models can be pushed around by a single person. While they cannot provide the vertical reach of a motorized lift and cannot be used on rough terrain, they can be very useful for pruning smaller trees in tree nurseries, fruit orchards, and other specialized settings.

Make sure to choose the right type of aerial lift for whatever tree pruning project you have planned. If you need any more information on aerial lift types and their capabilities, contact the experts at Ever-Joy Rent All .

Tired of Your Backyard? 4 Steps for a Diy Makeover

Fri, 01 May 2020 06:44:58 GMT

During 2020, may Americans will spend much more time at home than they normally would. For many people, this has resulted in them looking around at their property and not being entirely happy with its look or feel. If you fall into this category, though, be cautious about just jumping into a big overhaul without doing some preparation first.

What should you do before you dig into the ground for the first time? Here are a few key steps.

1. Keep It Manageable

If you have spent a month of self-isolation at home staring at your backyard, you may want to just rip it all up. But if you act rashly and take on a project that's too big, you might end up making the problem worse. You might, in fact, end up with a torn-up, muddy mess that you don't know how to fix or don't have the time to finish.

Instead, come up with manageable individual projects that propel you toward your overall goal. If you want to put in a new play area for the kids, you might plan five smaller projects: prepare the ground, build a base, install the play equipment, and add a pathway. Want to add flower beds to the yard? Break them into groups. Giving the whole yard a makeover? Divide it into smaller sections or particular design elements.

2. Design With Specifics

Once you know the goal you want to reach with a particular project, design a specific plan to reach it. This should be a step-by-step set of plans that's as detailed as possible. Include measurements, depths, and potential obstacles. The more details you plan, write down, and research, the faster and easier your project will likely go.

If you want to remove a section of lawn and plant a garden, for instance, determine exactly how many square feet is involved and how deep you'll need to till the soil. If you want to add planter boxes, you will likely need to prepare the ground differently, and you will need a different set of tools than what you would need for just planting in the ground.

3. Talk With a Rental Service

One thing that many homeowners may not realize is how much help they can get from gardening equipment rentals. Visit with a local rental service once you have your detailed plans. They can advise on the best type of equipment for the scale of a project, your skill level, and your time and budget.

You'll want to have your detailed plans in hand. Everything from the size of the project to the shape of your yard can affect what is the best piece of equipment to rent.

For example, if you're adding a lot of gravel, you'll need to have a good idea of the amount of rock you need, how the yard is shaped, what fences or obstacles are in the way, and your skill with equipment. With this this information, you can determine whether you should get a walk-behind loader, a skid-steer loader, or even a larger backhoe.

4. Ask for Help With Equipment

When renting anything, be sure you fully understand how to use the equipment safely. Even the simplest power tools and small equipment can be dangerous to the untrained operator. Decide who will operate the equipment and have them learn safety procedures from the rental company. If you're not comfortable with a piece of equipment, ask if there are other options that you might be better able to handle.

If you follow these few steps before attacking your landscape problems, you'll be set up for success. Want to learn more about how to manage your particular backyard makeover? Start with a visit to Ever-Joy Rent All today.

Equipment Rentals to Improve a Soggy Yard

Fri, 06 Mar 2020 06:40:23 GMT

Poor drainage in your yard can make for a soggy situation. Whether you're tired of stepping in puddles, worried about foundation damage, or looking to protect your landscape plants from rot, drainage improvement projects can help.

Solving the soggy yard problems, particularly putting in a French drain, may require a lot of manual labor, though. And that's where rental equipment comes into play. Choosing the right power tools and machinery can help you maximize the effects on drainage and minimize the amount of time and effort you spend on the project.

Here are a few types of rental equipment you could use for a drainage improvement project.

1. Trencher or Backhoe

Drainage trenches can be absolutely essential if you want to divert water from a low-lying area, insert a French drain, or bury a downspout extension. But whether you're going to fill the trench back in or not, digging it in the first place can be hours of work.

One equipment option for this situation is to rent a backhoe and hire a backhoe operator. However, this works better for larger trenches. A backhoe's scoop is so large that a precision French drain trench isn't really a backhoe specialty.

Another option for the French drain trench is a trencher. Using a trencher can allow you to quickly and easily create the exact trench you need. One benefit of using equipment rather a shovel is that because it's so much easier than digging by hand, you won't be tempted to skimp on the size or depth of the trench.

2. Skid Steer Loader

Another piece of machinery that can help out when moving around soil, gravel, sod, and other materials is a skid steer loader.

Skid steer loaders aren't designed for digging out a precision trench, but once you've installed the pipe, these machines can fill the trench back in easily. In addition, this type of machine is designed for loading, meaning it can help you remove any excess dirt to another area of your yard with much less effort than a shovel and wheelbarrow would take.

3. Auger

Some drainage problems require a dry well. An auger can help you to turn this into a DIY project. You'll just need to use the auger to drill a hole straight down. You'll then insert a drainage sleeve filled with gravel, which will allow water to drain away more easily during a heavy rain.

4. Sod Cutter

If you pride yourself on having a great lawn, you may want to carefully lift the sod off the area before digging a trench. A sod cutter can help you with precise, clean cutting so you know the sod pieces will fit nicely back in later.

Once you've cut it out, you can simply set the sod aside. Complete your French drain or buried pipe project, and return the sod to its original spot after the project is complete.

5. Reciprocating Saw

Typically, the pipes used for French drains come pre-slotted so you won't have to drill holes in the pipe. Depending on the amount of space you have for the drain, however, you may need to cut the pipe down to size. For this task, a reciprocating saw will come in handy.

If you buy the pipe at a home improvement store, you may be able to have the personnel at the store cut the pipe for you (if you already know what length you need). Otherwise, a rental saw may be your best option.

These are just some of the rental tools and equipment that could come in very handy when you need to fix a drainage problem in your yard. Whether you're looking for a smaller skid steer loader or a large machine like a backhoe, Ever-Joy Rent All has you covered. Give us a call today to learn more.

6 Safety Steps to Take Before Using a Chainsaw

Wed, 05 Feb 2020 06:38:31 GMT

Chainsaws are a valuable tool for serious backyard work. But they are also among the most dangerous handheld tools that a person can easily buy or rent. This means that everyone who handles a chainsaw must take steps - even before turning on the machine - to ensure safety and best practices no matter what project they are working on.

What are some of these steps? Here are a few things to do before you start up your new chainsaw.

1. Speak With a Pro

Take the time to consult with an experienced professional before you start working in your backyard. If renting a chainsaw, explain what you need to do so that you can match the right chainsaw model with your work. Go over the tool's proper use, safety features, and maintenance with the rental pro. Remember that every model is a little different, so you should familiarize yourself with the specifics before use.

2. Use Safety Equipment

Anyone who works with power tools should also use good quality personal protective equipment (PPE) for safety. For chainsaw users, this includes safety glasses or goggles, a hard hat (for falling or flying objects), sturdy work gloves, work boots, and an apron or chaps made specifically to protect your legs. Inspect this safety equipment and don it before you pick up any chainsaw.

3. Have a Buddy

A second pair of eyes and hands is a good idea when cutting limbs or small trees. The buddy system gives you an additional person off of whom to bounce ideas - hopefully preventing any bad decisions. It also provides someone to watch out for safety and to help guide you or remove branches as you work. And it's someone who can help if there is an emergency.

4. Make a Plan

Talk and walk through your plan for how to proceed. What is your goal, and what specific things do you need to do in order to accomplish it? How will you proceed through the steps of your work? How will you do it safely?

If felling a small tree, for instance, how do you expect it to fall? Can you safely control its fall, or would it be wiser to go with its natural fall angle? What is your escape route? Once the tree is down, how will you cut it into smaller pieces? What size pieces do you need and where will they go?

5. Clear the Area

Don't get so focused on the tree or branches that you don't pay attention to what's around you. Is the ground below safe, solid, and dry? Could you slip and fall? If so, you may benefit from putting down something more solid to walk on. Look around the area to identify items that could be damaged if the tree falls in certain ways. Remove what you can. And ensure that you and your helper have unobstructed escape routes.

6. Inspect the Chainsaw

Before turning it on, go over what you learned about the chainsaw itself. If your buddy was with you when you rented it, ask them to help you be certain you're using it properly. Inspect the knobs, buttons, and chain to make sure that it everything is in good condition and tight. Practice using the safety features. Only when you're comfortable with the machine again should you actually turn it on.

Even if you're in a hurry, taking the right preparatory steps will keep everyone safe and help the work go quickly and easily. Want more tips on getting ready for your backyard chainsaw project? Visit the experts at Ever-Joy Rent All Corp today.

Rent This Equipment Once a Year for Home Maintenance

Thu, 02 Jan 2020 06:34:30 GMT

Whether you're a homeowner or whether you're a renter who does all the yard work, you may find that home and yard maintenance can require a lot more machinery than you expected. Lawn care equipment, power washing equipment, landscaping maintenance equipment such as chainsaws, and other large tools and machinery can take up a lot of space.

Fortunately, if you have a machinery rental company in your area, you don't have to make room in your garage for specialized tools that you need regularly, yet don't use frequently. Here are some of the top home and yard maintenance equipment types ideal for renting because you'll likely need them only once or twice a year.

1. Pressure Washer

A pressure washer can be a great tool to blast away a season's worth of gunk and grime. When your deck starts to look a bit under the weather or your concrete driveway needs a good spring cleaning, take that as a sign that you should go ahead and rent a pressure washer.

Remember to research the best cleaning method for any given surface before using a pressure washer on it. Pressure washing a roof, for instance, may damage it.

2. Aerial Lift

Do you clean your gutters each fall? You may need to clean them in the spring as well, depending on the types of trees you have in your yard. But either way, your once- or twice-yearly cleaning could be greatly enhanced by an aerial lift, also called a boom lift.

If you rent an aerial lift, you don't have to worry about falling off a ladder while you access your gutters. You can use the lift harness to keep you secure, and even if you aren't the most athletic person, you can still get the job done.

3. Leaf Blower

If you're a bit obsessed with tidiness in the yard, you may need to have a leaf blower available 24/7. But for most people, a simple rake will do the trick the majority of the year. Typically, you won't really need a leaf blower except when large amounts of leaves fall once a year in autumn.

Renting a leaf blower allows you to get the most use out of it without having to take on all the responsibilities of ownership.

4. Wood Chipper

Occasionally, you'll find yourself with a large branch or even an entire tree that has fallen on your lawn. Rather than pay someone to haul it away, you could use a wood chipper to turn this wood into excellent mulch. You'll then be able to use the mulch on your garden beds and around trees and other landscaping features.

However, you probably don't have large downed trees very often. You can probably get away with using a wood chipper just once or twice per growing season, making it an ideal candidate for rental.

5. Aerator

An aerator can work wonders for your lawn. Providing better access for air, water, and nutrients can really help your lawn to flourish. But if you have limited time, mobility, or patience, you likely don't want to use manual aeration tools - especially on a large lawn. Instead, use a towable or self-propelled aerator.

Many lawns will only need aerating once per year. That means that if you own an aerator, you'll need to store it away somewhere 364 days just to get one use out of it. But if you use a rental company, you'll be able to access the aerator when you need it and keep your costs down while saving space in your garage.

As you can see, many types of equipment essential for home and yard maintenance are really only necessary once or twice per year.

The rest of the year, you can let a rental company such as Ever-Joy Rent All take care of the equipment so you don't have to care for it, winterize it, maintain it, and give it garage space. For more information about the types of equipment we offer, get in touch with Ever-Joy Rent All today .